Infant CPAP Parts Oxygen Analyzer

• Measurement Range: 0.0-100%
• Type: Oxygen
• Oxygen Alarm Range: 0%-99%(>1% Lower Than Low Alarm)
• Humidity: 0-95%(Non-Condensing)
• Transport Package: Carton
• Specification: approximately 0.25 kg
• Model NO.: SANSHUN III
• Trademark: Kindsway
• Origin: China
• Production Capacity: 10000 Piece/Pieces Per Month

Product Description

Product Description

Measurement Range	0.0-100%
Resolution	0.1%
Accuracy and Linearity	±1% of full scale at constant temperature,R.H.and pressure when calibrated at full scale Total
Accuracy	±3% Actual oxygen level over full operating temperature range
Response Time	90% of final value in approximately 15 seconds at 23 C
Operating Temperature	15 C - 40 C (59 F - 104 F)
Storage Temperature	-15 C-50 C (5 F - 104 F)
Atmospheric Pressure	800-1013 mBars
Humidity	0-95%(non-condensing)
Power Requirements	3,AAA Alkaline batteries(3 x 1.5 Volts)
Battery Life	approximately 5000 hours in typical use
Low Battery Indication	"LOW BAT"icon displayed on LCD
Sensor Type	ENVITEC OOM102-1 galvanic fuel cel
Expected Sensor Life	>1,000,000% O2 Hours over 2 years in typical applications Alarm
System	high/low alarms, audio buzzer
Low Oxygen Alarm Range	0%-99%(>1% lower than low alarm)
High Oxygen Alarm Range	1%-100%(>1% higher than low alarm)
Alarm Accuracy	exact to displayed alarm value
Dimensions	84mm x 130mm x 31mm
Weight	approximately 0.25 kg

The OOM102-1 is a galvanic, partial pressure sensor that is specific to oxygen. It consists of two electrodes (a cathode and an anode), a FEP membrane and an electrolyte. Oxygen diffuses through the FEP membrane and immediately reacts electrochemically at a gold cathode. Concurrently, oxidation occurs electrochemically at a lead anode, generating an electrical current and providing a voltage output. Electrodes are immersed in a unique gelled weak acid electrolyte which is responsible for the sensors long life and motion insensitive characteristic. Since the sensor is specific to oxygen, the current generated is proportional to the amount of oxygen present in the sample gas. When no oxygen is present, there is no electrochemical reaction and therefore, negligible current is produced. In this sense, the sensor is self-zeroing.
 CAUTION: The OOM102-1 oxygen sensor is a sealed device containing a mild acid electrolyte, lead (Pb), and lead acetate. Lead and lead acetate are hazardous waste constituents and should be disposed of properly, or returned to Kindswayfor proper disposal or recovery.
 CAUTION: Dropping or severely jarring the sensor after calibration may shift the calibration point enough to require recalibration.
 CAUTION: The flow diverter for the sensor is for use with flowing gases only.
DO NOT use the diverter when performing static sampling, such as in incubators, oxygen tents, oxygen hoods, etc.