Powerful and High Quality Infant CPAP

• Customization: Available
• CPAP: 0-10CMH2o
• Transport Package: Carton
• Model NO.: AD-II
• Specification: 220W
• Trademark: SANSHUN
• Origin: China
• Production Capacity: 1000 Piece/Pieces Per Week

Product Description

Product Overview

AD-II infant CPAP

Infant CPAP is a sort of special medical equipment for supporting of babies' breath which devised and manufactured based on the wide application of closed continuous NCPAP in department of pediatrics. It uses on the course of ventilation treatment of Nasal-CPAP for premature, neonate, infant to children below 14 year old. The mode of CPAP can reduce babies' work of breathing effectively, while keeping the autonomous respiration.

FEATURES AT A GLANCE

1.Assemble the main machine, humidifier and the optional compressor together, to save space.
2.Inside the Air-oxygen Blender, and the FIO2 is continuous and controllable.
3.Adjusting the oxygen concentration and the flow respectively.
4.It is easy to monitor the FIO2, to ensure the safety of oxygen.
5.High accuracy of CPAP regulating, combine the system pressure monitor with safety valve to ensure the safety of patient.
6.The main machine does not need electric power, and match with support arm.
7.The optional compressor adopts imported pump, with little water and low noise.
8.Match with humidifier that controlled by electric or automatically, to ensure the best situation of humidifier.
9.The light and diversified tubes and rhinobyons reduce the patient's WOB; the convenient fixed device reduces the compressor of patient's head and face, and the injure of nasal septum.
10.It is applied to PIIUC, NICU, PICU and first aid room widely.

Component Specification

Model	PN-3000 air compressor
Output pressure	0.25-0.4MPa
Continuous flow	60LPM
Peak flow	>120LPM
Noise	<55dB(A)
Power source	AC 220V/110V, 50-60Hz
Power	500VA
Thermal protection	120C
Pressure display	Pressure gauge

Model	PN-2000FC850 humidifier
Power source	AC 220V/110V, 50-60Hz
Heater plate	150W
Thermal cut off	95±6C
Display	Three digit, 0.56inch,7 segment LED
Temperature monitoring	0-75C
Max temperature of heated plate	85C
Heater Wire	22V-,2.73A, 60W, 50/60Hz
Power Rate	220W
Alarm	Yes
Temperature control setting	Invasive mode: chamber outlet: 35.5C-37C, airway 35-40C
Temperature control setting	Noinvasive Mode: chamber outlet:31C, airway 28-34C